Jintao Zhang et al.
National Institute of Metrology (NIM), China

    RE-DETERMINATION OF THE BOLTZMANN CONSTANT WITH FIXED-LENGTH CYLINDER  (abstract)
 

Dušan Mramor et al.
University of Ljubljana, Faculty of Economics, Slovenia

    CHALLENGES OF FINANCING METROLOGY
 

COMPARISON OF COULOMB BLOCKADE THERMOMETERS WITH THE INTERNATIONAL TEMPERATURE SCALE PLTS-2000  (abstract)

   M. Meschke, Helsinki University of Technology, Finland
   J. Engert, Physikalisch - Technische Bundesanstalt (PTB), Germany
   D. Heyer, Physikalisch - Technische Bundesanstalt (PTB), Germany
   J. Pekola, Helsinki University of Technology, Finland
   

REALIZATION OF ITS-90 ABOVE SILVER FREEZING POINT AT NIM  (abstract)

   Z. Yuan, National Institute of Metrology (NIM), China
   X. Lu, National Institute of Metrology (NIM), China
   J. Wang, National Institute of Metrology (NIM), China
   C. Bai, National Institute of Metrology (NIM), China
   W. Dong, National Institute of Metrology (NIM), China
   Xiaopeng Hao, National Institute of Metrology, China, Tiejun Wang, National Institute of Metrology, China

MEASUREMENT OF THERMODYNAMIC TEMPERATURE FROM THE SILVER POINT TO 4000 K, BASED UPON THE COMPOUND N=2 SCHEME  (abstract)

   P. Bloembergen, National Metrology Institute of Japan (NMIJ, AIST), Japan
   Y. Yamada, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

COMPARISON OF EUTECTIC-BASED AND ITS-90 RADIATION THERMOMETRY SCALES  (abstract)

   A. Diril, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   Ö. Pehlivan Güven, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   

SPECTRAL RADIATION DRIFT OF LEDS UNDER STEP-MODE OPERATION AND ITS EFFECT ON THE MEASUREMENT OF THE NONLINEARITY OF RADIATION THERMOMETERS  (abstract)

   W. Dong, National Institute of Metrology (NIM), China
   Z. Yuan, National Institute of Metrology (NIM), China
   P. Bloembergen, National Institute of Metrology, Netherlands
   X. Lu, National Institute of Metrology (NIM), China
   Y. Duan, Tsinghua University, China
   

THERMAL IMAGE DEGRADATION THROUGH A HEATED SAPPHIRE WINDOW  (abstract)

   S. Park, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   Y. Yoo, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   G. Lee, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   C. Park, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   

TEMPERATURE MEASUREMENT OF SEMITRANSPARENT SILICON WAFERS BASED UPON ABSORPTION EDGE WAVELENGTH SHIFT  (abstract)

   T. Iuchi, Toyo University, Japan
   T. Seo, Toyo University, Japan
   

PRACTICAL ACOUSTIC THERMOMETERY WITH ACOUSTIC WAVEGUIDES  (abstract)

   M. de Podesta, National Physical Laboratory (NPL), United Kingdom
   G. Sutton, National Physical Laboratory (NPL), United Kingdom
   R. Underwood, National Physical Laboratory (NPL), United Kingdom
   

ULTRASONIC HIGH TEMPERATURE SENSORS: PAST EXPERIMENTS AND PROSPECTIVES FOR FUTURE USE  (abstract)

   M. LAURIE, European Commission - Joint Research Centre - Institute for Energy , Netherlands
   D. MAGALLON, European Commission - Joint Research Centre - Institute for Energy , Netherlands
   J. PIERRE, Institut de Radioprotection et de Sureté Nucléaire, France
   C. MARQUIE, Institut de Radioprotection et de Sureté Nucléaire, France
   S. EYMERY, Institut de Radioprotection et de Sureté Nucléaire, France
   Ronan MORICE, Laboratoire Commun de Métrologie LNE-CNAM, France

FIXED-POINT THERMOCOUPLES IN POWER PLANTS - LONG TERM OPERATIONAL EXPERIENCES  (abstract)

   H. Lehmann, Electrotherm GmbH, Germany
   

NOVEL FLOW CONTROL/MEASUREMENT SYSTEM IN MAGNETIC SUSPENSION BALANCE/DIFFUSION-TUBE HUMIDITY GENERATOR  (abstract)

   H. Abe, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

A SECOND-GENERATION NIST GRAVIMETRIC HYGROMETER  (abstract)

   C. Meyer, National Institute of Standards and Technology (NIST), United States
   J. Hodges, National Institute of Standards and Technology (NIST), United States
   R. Hyland, National Institute of Standards and Technology, United States
   G. Scace, National Institute of Standards and Technology (NIST), United States
   J. Valencia-Rodriguez, Advanced Scientific Applications de México, Mexico
   James Whetstone, National Institute of Standards and Technology, United States

REALIZATION OF HIGHER HUMIDITY STANDARD POINTS BASED ON WATER VAPOR PRESSURE  (abstract)

   H. Yi, National Institute of Metrology (NIM), China
   

DEVELOPMENT OF A HUMIDITY GENERATOR FOR OPERATION UP TO 200 °C  (abstract)

   D. Vega-Maza, National Institute of Standards and Technology (NIST), Spain
   W. Miller, National Institute of Standards and Technology (NIST), United States
   D. Ripple, National Institute of Standards and Technology (NIST), United States
   G. Scace, National Institute of Standards and Technology (NIST), United States
   

AN INVESTIGATION OF THE CORRELATION BETWEEN CONTACT THERMOMETRY AND DEW-POINT TEMPERATURE REALIZATION  (abstract)

   R. Benyon, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   N. Böse, Physikalisch - Technische Bundesanstalt (PTB), Germany
   H. Mitter, E+E Elektronik Ges. m.b.H. (BEV/E+E), Austria
   D. Mutter, MBW Calibration, Ltd. (MBW), Switzerland
   

DETERMINATION OF THE THERMODYNAMIC TEMPERATURE OF GOLD FIXED-POINT CELLS  (abstract)  (poster loaction)

   M. Battuello, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   F. Girard, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   M. Florio, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

THERMODYNAMIC TEMPERATURE MEASUREMETS TRACEABLE TO PHOTOMETRIC STANDARDS  (abstract)  (poster loaction)

   M. Ballico, National Measurement Institute, Australia
   

ABSOLUTE RADIOMETRY OF METAL-CARBON EUTECTIC FIXED-POINTS FOR A NEW TEMPERATURE SCALE  (abstract)  (poster loaction)

   K. Anhalt, Physikalisch - Technische Bundesanstalt (PTB), Germany
   J. Hartmann, Physikalisch - Technische Bundesanstalt (PTB), Germany
   G. Machin, National Physical Laboratory (NPL), United Kingdom
   E. Woolliams, National Physical Laboratory (NPL), United Kingdom
   H. Yoon, National Institute of Standards and Technology (NIST), United States
   Martin Dury, National Physical Laboratory, UK

PREPARATION TO THE MEASUREMENT OF THERMODYNAMIC TEMPERATURE OF HIGH TEMPERATURE FIXED POINTS  (abstract)  (poster loaction)

   B. Khlevnoy, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   M. Samoylov, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   S. Ogarev, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   D. Otryaskin, VNIIOFI, Russian Federation
   

PHOTOELECTRON THERMOMETORY AS A NOVEL METHOD TO MEASURE THERMODYNAMIC TEMPERATURE  (abstract)  (poster loaction)

   I. Kinoshita, Yokohama City University, Japan
   J. Ishii, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

RADIOMETRIC TEMPERATURE COMPARISONS OF THREE NIST GOLD FREEZING-POINT BLACKBODIES  (abstract)  (poster loaction)

   N. Sasajima, National Metrology Institute of Japan (NMIJ, AIST), Japan
   C. Gibson, National Institute of Standards and Technology (NIST), United States
   V. Khromchenko, National Institute of Standards and Technology (NIST), United States
   R. Saunders, National Institute of Standards and Technology (NIST), United States
   H. Yoon, National Institute of Standards and Technology (NIST), United States
   

RECENT PROGRESS IN NOISE THERMOMETRY AT 693 K USING QUANTIZED VOLTAGE NOISE RATIO SPECTRA  (abstract)  (poster loaction)

   W. Tew, National Institute of Standards and Technology (NIST), United States
   S. Benz, National Institute of Standards and Technology (NIST), United States
   P. Dresselhaus, National Institute of Standards and Technology (NIST), United States
   H. Rogalla, National Institute of Standards and Technology (NIST), Netherlands
   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   John Labenski, BAE Systems, Arlington, USA

INVESTIGATING THE INCONSISTENCY OF ITS-90 FOR SPRTS IN THE SUB-RANGE 0℃ TO 419.527℃  (abstract)  (poster loaction)

   J. sun, National Institute of Metrology (NIM), China
   J. zhang, National Institute of Metrology (NIM), China
   z. Kang, Institute of Metrology of Hebei Province, China
   Y. Duan, National Institute of Metrology (NIM), China
   

COMPARISON OF TEMPERATURE SCALES BELOW SILVER POINT REALIZED BY RADIATION THERMOMETERS  (abstract)  (poster loaction)

   T. Keawprasert, National Institute of Metrology (NIMT), Thailand
   N. Rujirat, National Institute of Metrology (NIMT), Thailand
   P. Wongnut, National Institute of Metrology (NIMT), Thailand
   E. Puttiwong, National Institute of Metrology (NIMT), Thailand
   

REALIZATION OF THE 3HE VAPOR PRESSURE SCALE AND DEVELOPMENT OF A LIQUID-HE-FREE CALIBRATION APPARATUS  (abstract)  (poster loaction)

   T. Shimazaki, National Metrology Institute of Japan (NMIJ, AIST), Japan
   K. Toyoda, National Metrology Institute of Japan (NMIJ, AIST), Japan
   O. Tamura, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

THE DISCONTINUITY IN THE FIRST DERIVATIVE OF THE ITS-90   (abstract)  (poster loaction)

   R. Rusby, National Physical Laboratory (NPL), United Kingdom
   

THE COMPARISON OF THE PERFORMANCE OF HTSPRT VERSUS THERMOCOUPLE AROUND FREEZING POINT OF SILVER  (abstract)  (poster loaction)

   R. Strnad, Czech Metrology Institute, Czech Republic
   M. Šindelář, Czech Metrology Institute, Czech Republic
   

THE INFLUENCE OF TITANIUM ON THE ALUMINIUM FIXED-POINT TEMPERATURE  (abstract)  (poster loaction)

   P. Petchpong, National Institute of Metrology (NIMT), Thailand
   D. Head, , United Kingdom
   J. Au, Brunel University, United Kingdom
   

THE QUANTITATIVE EFFECT OF LOW LEVEL ANIMONY ON THE TIN FIXED-POINT CELL  (abstract)  (poster loaction)

   P. Petchpong, National Institute of Metrology (NIMT), Thailand
   D. Head, , United Kingdom
   J. Au, Brunel University, United Kingdom
   

STUDY FOR THE LONG TERM STABILITY ON THE SUPERFLUID TRANSITION TEMPERATURE OF HELIUM IN THE PAST TEN YEARS  (abstract)  (poster loaction)

   P. LIN, National Institute of Metrology (NIM), China
   Y. Lihong, Technical Institute of Physics and Chemistry, China
   Z. ZHANG, National Institute of Metrology (NIM), China
   

IMPACT OF THE TIME SPENT IN THE LIQUID PHASE ON THE LIQUID-SOLID TRANSITION  (abstract)  (poster loaction)

   E. RENAOT, LNE-INM/CNAM, France
   M. ELGOURDOU, LNE-INM/CNAM, France
   C. MARTIN, LNE-INM/CNAM, France
   

THE EFFECT OF THE INITIATION PROCESS OF FREEZE ON THE MEASUREMENT RESULT OF AL FREEZING POINT TEMPERATURE  (abstract)  (poster loaction)

   M. Abasov, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   S. Gerasimov, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   A. Ivanova, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   A. Pokhodun, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   O. Shulgat, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   

A COPPER POINT FOR CONTACT THERMOMETRY  (abstract)  (poster loaction)

   J. Tavener, Isothermal Technology Limited, United Kingdom
   

WATER TRIPLE POINT ANALYSIS COMPARING CELLS MADE FROM QUARTZ AGAINST THOSE FROM BOROSILICATE GLASS  (abstract)  (poster loaction)

   J. Tavener, Isothermal Technology Limited, United Kingdom
   N. Davies, Isothermal Technology Limited, United Kingdom
   

INVESTIGATION OF THE PARAMETERS OF SEALED TRIPLE-POINT CELLS FOR CRYOGENIC GASES  (abstract)  (poster loaction)

   B. Fellmuth, Physikalisch - Technische Bundesanstalt (PTB), Germany
   L. Wolber, Physikalisch - Technische Bundesanstalt (PTB), Germany
   

PRODUCTION OF A NEW TIN CELL AT INRIM  (abstract)  (poster loaction)

   P. Steur, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   R. Dematteis, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

SOME CURIOUS RESULTS WITH A GALLIUM FIXED POINT CELL  (abstract)  (poster loaction)

   P. Steur, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   R. Dematteis, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

THE α–β TRANSITION OF OXYGEN AS A SECONDARY FIXED POINT OF ITS-90  (abstract)  (poster loaction)

   A. Szmyrka-Grzebyk, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   L. Lipinski, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   A. Kowal, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   P. Steur, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   F. Pavese, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

AUTOMATED REALIZATION OF THE TRIPLE POINT OF WATER WITH THE MUSH METHOD  (abstract)  (poster loaction)

   X. Yan, National Institute of Metrology (NIM), China
   Y. Duan, National Institute of Metrology (NIM), China
   J. Yang, Beijing University of Chemical Technology, China
   J. Li, University of Science and Technology Beijing, China
   

COMPARISON OF THE TRIPLE POINT OF NEON USING DIFFERENT SEALED CELLS AT NMIJ/AIST   (abstract)  (poster loaction)

   T. Nakano, National Metrology Institute of Japan (NMIJ, AIST), Japan
   O. Tamura, National Metrology Institute of Japan (NMIJ, AIST), Japan
   H. Sakurai, National Metrology Institute of Japan (NMIJ), AIST, Japan
   

ARGON TRIPLE POINT FOR LONG STEM SPRTS: THERMAL BEHAVIOUR  (abstract)  (poster loaction)

   M. Dobre, SMD, Belgium
   I. Didialaoui, LNE-INM/CNAM, France
   Y. Hermier, LNE-INM/CNAM, France
   

FIXED-POINT-COMPARISON UNCERTAINTIES AT THE ZINC POINT WITH TWO CELL GEOMETRIES  (abstract)  (poster loaction)

   A. Gerlitzke, Physikalisch - Technische Bundesanstalt (PTB), Germany
   S. Rudtsch, Physikalisch - Technische Bundesanstalt (PTB), Germany
   M. Fahr, National Research Council (NRC), Canada
   

IMPURITIES IN WATER TRIPLE POINT CELLS  (abstract)  (poster loaction)

   A. Peruzzi, VSL, Netherlands
   M. Dobre, SMD, Belgium
   J. Van Geel, VSL, Netherlands
   S. Van Der Linden, VSL, Netherlands
   

TOWARDS CARBON DIOXIDE VAPOUR PRESSURE THERMOMETER  (abstract)  (poster loaction)

   A. Kartal Dogan, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   G. Bonnier, , France
   A. Uytun, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   I. Kocas, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   Y. Durgut, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   

INVESTIGATION OF GALLIUM MELTING POINT AS A CROSSCHECK FOR WATER TRIPLE POINT MEASUREMENTS  (abstract)  (poster loaction)

   R. Silva, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
   H. Vieira, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
   R. Teixeira, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
   S. Petkovic, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
   

DEVELOPMENT OF A MULTI RE-ENTRANT WELL TRIPLE POINT OF ARGON SYSTEM  (abstract)  (poster loaction)

   R. Ding, Fluke - Hart Scientific, United States
   M. Zhao, Fluke - Hart Scientific, United States
   

BEHAVIOUR OF TRIPLE POINT OF WATER CELLS FOR DIFFERENT CONDITION OF ICE MANTLE  (abstract)  (poster loaction)

   K. Kodaira, Japan Electric Meters Inspection Corporation, Japan
   

STUDY ON THE REALIZATION OF ZINC POINT AND THE ZINC-POINT CELL COMPARISON  (abstract)  (poster loaction)

   J. Widiatmo, National Metrology Institute of Japan (NMIJ, AIST), Japan
   M. Sakai, National Metrology Institute of Japan (NMIJ, AIST), Japan
   K. Satou, National Metrology Institute of Japan (NMIJ, AIST),
   K. Yamazawa, National Metrology Institute of Japan (NMIJ, AIST),
   J. Tamba, National Metrology Institute of Japan (NMIJ, AIST),
   Masaru Arai National Metrology Institute of Japan (NMIJ, AIST)

CONFIRMING IMPURITY EFFECT IN SILVER POINT REALIZATION FROM CELL-TO-CELL COMPARISONS  (abstract)  (poster loaction)

   J. Widiatmo, National Metrology Institute of Japan (NMIJ, AIST), Japan
   K. Harada, National Metrology Institute of Japan (NMIJ, AIST),
   K. Yamazawa, National Metrology Institute of Japan (NMIJ, AIST),
   J. Tamba, National Metrology Institute of Japan (NMIJ, AIST),
   M. Arai, National Metrology Institute of Japan (NMIJ, AIST),
   

COMPARISON OF NEON SAMPLES OF DIFFERENT ISOTOPIC COMPOSITION AND DETERMINATION OF THE TRIPLE POINT TEMPERATURE OF PURE 20NE AND 22NE WITH U ≈ 50 μK  (abstract)  (poster loaction)

   F. Pavese, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   P. Steur, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   S. Valkiers, IRMM, Belgium
   N. Bancone, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   D. Ferri, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   Domenico Giraudi, Istituto Nazionale di Ricerca Metrologica (INRIM)

THE EFFECT OF MAGNETIC FIELD ON THE REALIZATION OF TRIPLE POINT OF WATER  (abstract)  (poster loaction)

   G. Geršak, MIRS/UL-FE/LMK, Slovenia
   J. Bojkovski, MIRS/UL-FE/LMK, Slovenia
   

ASSESSMENT OF METHODS FOR DETERMINING THE IMPURITY CONCENTRATION IN MERCURY CELLS  (abstract)  (poster loaction)

   M. Kalemci, TUBITAK Ulusal Metroloji Enstitüsü (TUBITAK UME), Turkey
   A. Ince, Yeditepe University, Turkey
   G. Bonnier, TUBITAK UME, Turkey
   

THE INVESTIGATION OF THE IMMERSION PROFILES IN THE GALLIUM FIXED POINT AND IN TRIPLE POINT OF WATER CELLS  (abstract)  (poster loaction)

   R. Strnad, Czech Metrology Institute, Czech Republic
   M. Šindelář, Czech Metrology Institute, Czech Republic
   O. Prokeš, RWE Transgas Net, s.r.o., Czech Republic
   

THERMAL MANAGEMENT OF LIGHT SOURCES  (abstract)  (poster loaction)

   J. Hartmann, Physikalisch - Technische Bundesanstalt (PTB), Germany
   S. Völker, Technical University of Berlin, Germany
   

SILICON WAFER SURFACE TEMPERATURE MONITORING SYSTEM FOR PLASMA ETCHING PROCESS  (abstract)  (poster loaction)

   Y. Yamada, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Ishii, National Metrology Institute of Japan (NMIJ, AIST), Japan
   A. Nakaoka, Mizojiri Optical Co. Ltd., Japan
   Y. Mizojiri, Mizojiri Optical Co. Ltd., Japan
   

A "DISAPPEARING OBJECT" RADIATION THERMOMETER FOR LOW-EMISSIVITY PROCESS CONTROL  (abstract)  (poster loaction)

   P. Saunders, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

SPECTROSCOPIC MEASUREMENT OF AIR TEMPERATURE  (abstract)  (poster loaction)

   T. Hieta, Centre for Metrology and Accreditation (MIKES), Finland
   M. Merimaa, Centre for Metrology and Accreditation (MIKES), Finland
   

ARTIFICIAL FRUITS - POST HARVEST ONLINE MONITORING OF AGRICULTURAL FOOD   (abstract)  (poster loaction)

   T. Hübert, BAM Federal Institute for Materials Research and Testing, Germany
   C. Lang, BAM Federal Institute for Materials Research and Testing, Germany
   

INHOMOGENEITY ANALYSIS OF THERMOCOUPLES USED IN PRODUCTION PROCESSES IN THE STEEL INDUSTRY  (abstract)  (poster loaction)

   M. Holmsten, SP Technical Research Institute of Sweden, Sweden
   S. Ljungblad, SP Technical Research Institute of Sweden, Sweden
   L. Josefson, SP Technical Research Institute of Sweden, Sweden
   

MULTI-CHANNEL OPTICAL FIBRE THERMOMETER FOR PEM FUEL CELL APPLICATIONS  (abstract)  (poster loaction)

   L. Rosso, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   V. Fernicola, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

ALL FIBEER FABRY-PEROT TEMPERATURE SENSOR WITH LOW COST INTEROGATION SYSTEM  (abstract)  (poster loaction)

   E. Cibula, University in Maribor, Faculty of Electrical Engineering and Computer Science, Laboratory of Electro Optics and Sensor Systems, Slovenia
   M. Njegovec, University in Maribor, Faculty of Electrical Engineering and Computer Science, Laboratory of Electro Optics and Sensor Systems, Slovenia
   D. Đonlagić, University in Maribor, Faculty of Electrical Engineering and Computer Science, Laboratory of Electro Optics and Sensor Systems, Slovenia
   

PERFORMANCE OF A NOVEL MICROSENSOR-BASED DEW POINT TRANSMITTER  (abstract)  (poster loaction)

   T. Lehtola, Vaisala Oyj, Finland
   J. Leppänen, Vaisala Oyj, Finland
   T. Salo, Vaisala Oyj, Finland
   

EXTREMLY FAST 1 PPM WATER VAPOR MEASUREMENT BY A 1 MILIMETER DIAMETER SPHERICAL SAW DEVICE  (abstract)  (poster loaction)

   N. Takeda, Ball Semiconductor Incorpolated, United States
   M. Motozawa, Ball Semiconductor Co. Ltd., Japan
   

COMPARATIVE STUDY OF HUMIDITY ANALYSERS IN NITROGEN BELOW 1 MICRO-MOL/MOL  (abstract)  (poster loaction)

   P. Hernandez, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   R. Benyon, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   

IMPROVING THE UNCERTAINTY OF CALIBRATION USING A TRANSPORTABLE HUMIDITY AND TEMPERATURE GENERATOR  (abstract)  (poster loaction)

   R. Farley, Rotronic Instruments (UK) Ltd, United Kingdom
   B. Ramsey, VCT Ltd, United Kingdom
   R. Gee, Rotronic Instruments (UK) Ltd, United Kingdom
   

PRACTICAL STUDY OF PSYCHROMETER CALIBRATIONS  (abstract)  (poster loaction)

   A. Kentved, Danish Electronics Light & Acoustics (DELTA), Denmark
   D. Hudoklin, MIRS/UL-FE/LMK, Slovenia
   M. Heinonen, Centre for Metrology and Accreditation (MIKES), Finland
   

TRANSFER CHARACTERISTIC LINEARIZATION OF RELATIVE HUMIDITY SENSORS.  (abstract)  (poster loaction)

   Y. Barbar, «TKA SCIENTIFIC INSTRUMENTS» LTD, Russian Federation
   M. Golikov, «TKA SCIENTIFIC INSTRUMENTS» LTD, Russian Federation
   K. Tomsky, «TKA SCIENTIFIC INSTRUMENTS» LTD, Russian Federation
   

DETERMINATION OF HOMOGENEITY AND STABILITY OF HUMIDITY TEST CHAMBERS.  (abstract)  (poster loaction)

   A. Ince, T.C. Yeditepe University, Turkey
   G. Aslanbay, Yeditepe University, Turkey
   A. Davut, Turkish Standards Instıtution, Turkey
   

RAPID RELATIVE HUMIDITY CALIBRATION  (abstract)  (poster loaction)

   J. Lovell-Smith, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   R. Mason, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

RELATIVE HUMIDITY SENSOR BEHAVIOUR AND CALIBRATION AT 100%RH  (abstract)  (poster loaction)

   J. Lovell-Smith, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   R. Mason, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

MEASURING SHELL RESONANCES OF BOLTZMANN CONSTANT RESONATOR  (abstract)  (poster loaction)

   D. Truong, LNE-INM/CNAM, France
   F. Sparasci, LNE-INM/CNAM, France
   E. Foltete, FEMTO-ST, France
   L. Pitre, LNE-INM/CNAM, France
   

THE LENGTH DETERMINATION OF A FIXED PATH CYLINDRICAL RESONATOR WITH THE DUAL WAVELENGTH LASER INTERFERENCE METHOD  (abstract)  (poster loaction)

   J. Sun, National Institute of Metrology (NIM), China
   J. Zhang, National Institute of Metrology (NIM), China
   X. Zhang, National Institute of Metrology (NIM), China
   H. Lin, National Institute of Metrology (NIM), China
   

PERTURBATION MEASUREMENT OF WAVEGUIDE FOR THE ACOUSTIC THERMOMETRY  (abstract)  (poster loaction)

   H. Lin, National Institute of Metrology (NIM), China
   J. Zhang, National Institute of Metrology (NIM), China
   X. Feng, National Institute of Metrology (NIM), China
   

ASYMMETRY AND BACKGROUND CONTRIBUTIONS IN FREQUENCY RESPONCE OF ACOUSTIC MODES WITH LOW QUALITY FACTORS  (abstract)  (poster loaction)

   X. Feng, Tsinghua University, China
   K. Gillis, National Institute of Standards and Technology (NIST), United States
   J. Zhang, National Institute of Metrology (NIM), China
   H. Lin, National Institute of Metrology (NIM), China
   Y. Duan, Tsinghua University, China
   

SHELL PERTURBATIONS OF AN ACOUSTIC THERMOMETER DETERMINED FROM SPEED OF SOUND IN GAS MIXTURES  (abstract)  (poster loaction)

   R. Gavioso, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   G. Benedetto, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   R. Cuccaro, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   C. Guianvarc'h, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   D. Madonna Ripa, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   Paolo Alberto Giuliano Albo, INRIM, Italy, L. Pitre, LNE-INM/CNAM, France, D. Truong, LNE-INM/CNAM, France

PROGRESS TOWARDS AN ACOUSTIC DETERMINATION OF THE BOLTZMANN CONSTANT AT CEM-UVA  (abstract)  (poster loaction)

   D. del Campo, Centro Español de Metrología, Spain
   C. Garcia, Centro Español de Metrología, Spain
   J. Segovia, Universidad de Valladolid, Spain
   M. Martín, Universidad de Valladolid, Spain
   D. Vega, Universidad de Valladolid, Spain
   

NUMERICAL PREDICTION OF EUTECTIC TEMPERATURE USING PHASE-FIELD MODEL   (abstract)  (poster loaction)

   M. Ode, National Institute for Materials Science, Japan
   N. Sasajim, National Metrology Institute of Japan (NMIJ, AIST), Japan
   Y. Yamada, National Metrology Institute of Japan (NMIJ, AIST), Japan
   H. Onodera, National Institute for Materials Science, Japan
   

INVESTIGATIONS ON TWO CO-C FIXED-POINT CELLS PREPARED AT INRIM AND LNE-INM   (abstract)  (poster loaction)

   M. Battuello, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   M. Florio, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   M. Sadli, LNE-INM/CNAM, France
   F. Bourson, LNE-INM/CNAM, France
   

SPACE EXPERIMENTS IN RUSSIA AIMED AT DEVELOPING ONBOARD LOW-TEMPERATURE FIXED-POINT BLACKBODY  (poster loaction)

   V. Sapritsky, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   A. Burdakin, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   B. Khlevnoy, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   S. Ogarev, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   A. Panfilov, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   Andrey Puzanov, V. Rakov, M. Samoylov: All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI); V. Krutikov: Federal Agency on Technical Regulating and Metrology, Moscow, Russia; M. Kudashkina: Rocket and Space Corporation «Energia», Russia; V. Levtov: Central Scientific Research Institute for Machine Building (TsNIIMASH) , Korolev, Moscow region, Russia;

THE DEPENDENCE OF THE MICROSTRUCTURE OF EUTECTIC FE-C ON FREEZING RATE AND IMPURITY CONTENT. COMPARISON WITH 2D THEORY.  (abstract)  (poster loaction)

   P. Bloembergen, National Institute of Metrology (NIM), China
   B. Illerhaus, BAM, Bundesanstalt fuer Materialforschung und -pruefung, 12489 Berlin, Germany
   W. Zheng, National Institute of Metrology (NIM), China
   N. Sasajima, National Metrology Institute of Japan (NMIJ, AIST), Japan
   Y. Wang, National Metrology Institute of Japan (NMIJ, AIST), Japan
   Yoshiro Yamada, National Metrology Institute of Japan, AIST, Tsukuba, Japan

COMPARISON OF RE-C FIXED POINT CELLS AND THEIR T-90 TEMPERATURES BETWEEN NMIJ AND VNIIOFI  (abstract)  (poster loaction)

   B. Khlevnoy, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   I. Grigoryeva, VNIIOFI, Russian Federation
   M. Samoylov, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   Y. Yamada, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

PALLADIUM-CARBON EUTECTIC FIXED POINT FOR THERMOCOUPLE CALIBRATION  (abstract)  (poster loaction)

   M. Gotoh, National Research Council (NRC), Canada
   A. Todd, National Research Council (NRC), Canada
   D. Woods, National Research Council (NRC), Canada
   K. Hill, National Research Council (NRC), Canada
   

A W-CELL FIXED POINT FOR IN SITU CALIBRATION OF RADIATION THERMOMETERS IN AN INDUCTION FURNACE  (abstract)  (poster loaction)

   N. Sasajima, National Metrology Institute of Japan (NMIJ, AIST), Japan
   Y. Yamada, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Ishii, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

RESULTS OF LONG-TERM STABILITY TESTS PERFORMED FOR THE EUTECTICS CO-C AND PT-C  (abstract)  (poster loaction)

   T. Wang, National Institute of Metrology (NIM), China
   C. Bai, National Institute of Metrology (NIM), China
   W. Dong, National Institute of Metrology (NIM), China
   Z. Yuan, National Institute of Metrology (NIM), China
   P. Bloembergen, National Institute of Metrology, China, Netherlands
   

A JOINT WC-C PERITECTIC FIXED POINT PROJECT BETWEEN THE NIM AND THE NMIJ  (abstract)  (poster loaction)

   C. Bai, National Institute of Metrology (NIM), China
   N. Sasajima , National Metrology Institute of Japan (NMIJ, AIST), Japan
   Y. Yamada , National Metrology Institute of Japan (NMIJ, AIST), Japan
   Z. Yuan, National Institute of Metrology (NIM), China
   C. Ara , National Metrology Institute of Japan (NMIJ, AIST), Japan
   Tiejun Wang, National Institute of Metrology (NIM), Beijing, China

COMPARISON OF PYROMETRIC CO-C AND RE-C EUTECTIC POINT CELLS BETWEEN LNE-INM AND VNIIM  (abstract)  (poster loaction)

   M. Sadli, LNE-INM/CNAM, France
   M. Matveyev, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   F. Bourson, LNE-INM/CNAM, France
   V. Fuskov, VNIIM, Russian Federation
   Y. Sild, VNIIM, Russian Federation
   Anatoly Pokhodun, VNIIM, Russian Federation

DESIGN, CONSTRUCTION AND EVALUATION OF NI-C AND CO-C EUTECTIC FIXED POINTS  (abstract)

   J. Bojkovski, MIRS/UL-FE/LMK, Slovenia
   M. Hiti, MIRS/UL-FE/LMK, Slovenia
   V. Batagelj, MIRS/UL-FE/LMK, Slovenia
   J. Drnovšek, MIRS/UL-FE/LMK, Slovenia
   

REALIZATION OF FE-C EUTECTIC POINT USING AN ALUMINA CRUCIBLE  (abstract)

   Y. Kim, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   K. Gam, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   I. Yang, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   

CO-C EUTECTIC FIXED POINTS FOR THERMOCOUPLES AT NMIA  (abstract)

   M. Ballico, National Measurement Institute, Australia
   F. Jahan, National Measurement Institute, Australia
   

COBALT-CARBON EUTECTIC FIXED POINT FOR CONTACT THERMOMETRY  (abstract)

   M. Gotoh, National Research Council (NRC), Canada
   A. Todd, National Research Council (NRC), Canada
   D. Woods, National Research Council (NRC), Canada
   K. Hill, National Research Council (NRC), Canada
   

ESTIMATING UNCERTAINTIES IN INTERPOLATIONS BETWEEN CALIBRATION DATA FOR THERMOCOUPLES  (abstract)

   J. Pearce, National Physical Laboratory (NPL), United Kingdom
   P. Harris, National Physical Laboratory (NPL), United Kingdom
   J. Greenwood, National Physical Laboratory (NPL), United Kingdom
   

CONSTRUCTION OF SODIUM HEAT PIPE FURNACES AND THE ISOTHERMAL CHARACTERISTICS OF THE FURNACES  (abstract)

   X. Yan, National Institute of Metrology (NIM), China
   Y. Duan, National Institute of Metrology (NIM), China
   C. Ma, Beijing University of Technology, China
   Z. Lv, Beijing University of Chemical Technology, China
   

A NEW DIPHENYL GAS CONTROLLED HEAT PIPE  (abstract)

   O. Kerkhof, VSL, Netherlands
   J. van Geel, VSL, Netherlands
   A. Merlone, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE TEMPERATURE FIELD OF THE FIXED POINT CAVITY  (abstract)

   V. Fuksov, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   M. Matveyev, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   A. Pokhodun, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   

NEW METHOD TO GET TEMPERATURE DEPENDENCE OF TRANSMITTANCE AND EMITTANCE OF INFRARED WINDOWS  (abstract)

   G. Lee, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   S. Jeon, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   S. Park, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   Y. Yoo, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   C. Park, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   

LOW TEMPERATURE BLACKBODIES FOR TEMPERATURE RANGE FROM -60°C UP TO 90°C  (abstract)

   S. Morozova, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   B. Lisyanskiy, VNIIOFI (All-Russian Research Institute for Optical and Physical Measurements), Russian Federation
   A. Stakharny, VNIIOFI (All-Russian Research Institute for Optical and Physical Measurements), Russian Federation
   M. Samoylov, VNIIOFI (All-Russian Research Institute for Optical and Physical Measurements), Russian Federation
   S. Ogarev, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   Yong Shim Yoo, KRISS, Republic of Korea, Chul-Woung Park, KRISS, Republic of Korea, Seung-Nam Park, KRISS, Republic of Korea

CORRECTING RADIATION THERMOMETRY MEASUREMENTS FOR THE SIZE-OF-SOURCE EFFECT  (abstract)

   P. Saunders, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

TYPICAL R(T90)-CHARACTERISTICS OF PLATINUM THIN FILM RESISTANCE THERMOMETERS IN THE TEMPERATURE RANGE -50…+660 °C  (abstract)

   D. Boguhn, Endress+Hauser Wetzer, Germany
   

MEASUREMENT OF AC AND DC INSULATION LEAKAGE IN PLATINUM RESISTANCE THERMOMETERS UP TO 960 ºC  (abstract)

   C. García, Centro Español de Metrología, Spain
   D. del Campo, Centro Español de Metrología, Spain
   F. Raso, Centro Español de Metrología, Spain
   

IMPROVED HIGH-TEMPERATURE STANDARD RESISTANCE THERMOMETER  (abstract)

   M. Zhao, Fluke - Hart Scientific, United States
   D. Chen, Fluke - Hart Scientific, United States
   M. Newman, Fluke - Hart Scientific, United States
   R. Ding, Fluke - Hart Scientific, United States
   

THE IMMERSION CHARACTERISTICS OF INDUSTRIAL PRTS   (abstract)

   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   C. Jongenelen, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

IMPROVED INITIATION TECHNIQUE FOR THE METAL FIXED POINTS  (abstract)

   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   R. Mason, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

FURTHER FINDINGS ON IMPURITY PRECIPITATION IN METAL FIXED-POINTS  (abstract)

   M. Fahr, National Research Council (NRC), Canada
   S. Rudtsch, Physikalisch - Technische Bundesanstalt (PTB), Germany
   

NUMERICAL MODELLING OF HEAT FLUX IN FIXED-POINT CELLS DUE TO THE HYDROSTATIC-HEAD EFFECT  (abstract)

   V. Batagelj, MIRS/UL-FE/LMK, Slovenia
   J. Bojkovski, MIRS/UL-FE/LMK, Slovenia
   J. Drnovšek, MIRS/UL-FE/LMK, Slovenia
   

A SOLIDIFICATION APPROACH TO CORRECTING FOR THE EFFECT OF IMPURITIES IN FIXED POINTS  (abstract)

   Z. Malik, Imperial College London, United Kingdom
   J. Hunt, Oxford University, United Kingdom
   H. Davies, National Physical Laboratory (NPL), United Kingdom
   P. Lee, Imperial College London, United Kingdom
   D. Lowe, National Physical Laboratory (NPL), United Kingdom
   Patchariya Petchpong Peter Quested, NPL

INVESTIGATION OF THE EQUIVALENCE OF NATIONAL DEW-POINT TEMPERATURE REALIZATIONS IN THE RANGE -50 °C TO +20 °C  (abstract)

   M. Heinonen, Centre for Metrology and Accreditation (MIKES), Finland
   Miltiadis Anagnostou 2, Stephanie Bell 3, Mark Stevens 3, Robert Benyon 4, Reidun Anita Bergerud 5, Jovan Bojkovski 6, Rien Bosma 7, Jan Nielsen 7, Norbert Böse 8, Plunkett Cromwell 9, Aliye Kartal Dogan 10, Seda Oguz Aytekin 10, Ali Uytun 10, Vito Fernicola 11, Krzysztof Flakiewicz 12, Bertrand Blanquart 13, Domen Hudoklin 6, Per Jacobson 14, Anders Kentved 15, Isabel Lóio 16, George Mamontov 17, Alexandra Masarykova 18, Helmut Mitter 19, Regina Mnguni 20, Jan Otych 21, Anton Steiner 22, Nagyné Szilágyi Zsófia 23, Davor Zvizdic 24 2 Hellenic Institute of Metrology (EIM), Thessaloniki, Greece 3 National Physical Laboratory (NPL), Teddington, UK 4 Instituto Nacional de Técnica Aeroespacial (INTA), Madrid, Spain 5 Norwegian Metrology Service (JV), Oslo, Norway 6 MIRS/UL/FE-LMK, Ljubljana, Slovenia 7 VSL, Netherlands, Delft, Netherlands 8 Physikalisch-Technische Bundesanstalt (PTB),Braunschweig, Germany 9 National Metrology Laboratory (NML), Dublin, Ireland 10 Ulusal Metroloji Enstitüsü (UME), Turkey 11 Istituto Nazionale di Ricerca Metrologica (INRiM), Turin, Italy 12 Central Office of Measures (GUM), Warszawa, Poland 13 Centre Technique des Industries Aérauliques et Thermiques (CETIAT), Lyon, France 14 Swedish National Testing and Research Institute (SP), Borås, Sweden 15 Danish Electronics Light & Acoustics (DELTA), Hoersholm, Denmark 16 Instituto Português da Qualidade (IPQ), Lissabon, Portugal 17 D. I. Mendeleyev Institute for Metrology (VNIIM), St. Petersburg,Russia 18 Slovak Institute of Metrology (SMU),Bratislava, Slovakia 19 BEV / E+E Elektronik (BEV), Engerwitzdorf, Austria 20 National Metrology Institute of South Africa (NMISA),Pretoria, South Africa 21 Czech Metrology Institute (CMI), Brno, Czech Republic 22 Swiss Federal Office of Metrology (METAS), Bern, Switzerland 23 Hungarian Trade Licensing Office (MKEH), Budapest, Hungary 24 University of Zagreb, FSB-LPM, Zagreb, Croatia

EURAMET.T-K7 KEY COMPARISON OF WATER TRIPLE POINT CELLS  (abstract)

   A. Peruzzi, VSL, Netherlands
   R. Bosma, VSL, Netherlands
   O. Kerkhof, VSL, Netherlands
   P. Rosenkranz, BEV, Austria
   D. Del Campo, CEM, Spain
   M. Smid, J. Nielsen, M. Anagnostou, D. Zvizdic, E. Grudnewicz, M. Nedea, D.M. Neagu, P. Steur, E. Filipe, I. Lobo, I. Antonsen, E. Renaot, M. Heinonen, T. Weckstrom, J. Bojkovski, E. Turzo-Andras, S. Nemeth, M. White, E. Tegeler, M. Dobre, S. Duris, A. Kartal Dogan, A. Uytun,V. Augevicius, A. Pauzha, A. Pokhodun, S. Simic

ROUND ROBIN TEST OF HEAT FLUX SENSORS  (abstract)

   E. Turzo-Andras, MKEH Hungarian Trade Licensing Office, Hungary
   T. Magyarlaki, MKEH Hungarian Trade Licensing Office, Hungary
   S. Nemeth, MKEH Hungarian Trade Licensing Office, Hungary
   S. Rudtsch, Physikalisch - Technische Bundesanstalt (PTB), Germany
   C. Stacey, National Physical Laboratory (NPL), United Kingdom
   Ulf Hammerschmidt, PTB, Braunschweig, Germany Hans Liedberg, NMISA, Pretoria, South Africa Huib Blokland, TNO, Delft, Netherlands

PILOT STUDY: COMPARISON OF RADIANCE TEMPERATURE IN THE RANGE OF -40 °C TO 300 °C BETWEEN NIST, NPL, PTB AND NRC  (abstract)

   S. Mekhontsev, National Institute of Standards and Technology (NIST), United States
   V. Khromchenko, National Institute of Standards and Technology (NIST), United States
   L. Hanssen, National Institute of Standards and Technology (NIST), United States
   H. McEvoy, National Physical Laboratory (NPL), United Kingdom
   R. Underwood, National Physical Laboratory (NPL), United States
   Jörg Hollandt, PTB, DE, Berndt Gutschwager, PTB, DE, Ken Hill, NRC, CA, Donald Woods, NRC, CA

Rainer Feistel et al.
Leibniz-Institute for Baltic Sea Research , Germany

    TEOS-10: INTERNATIONAL THERMODYNAMIC EQUATION OF SEAWATER 2010
 

Graham Machin et al.
National Physical Laboratory (NPL), United Kingdom

    PRACTICAL IMPLEMENTATION OF THE MISE-EN-PRATIQUE FOR THE DEFINITION OF THE KELVIN ABOVE THE SILVER POINT  (abstract)
 

Yoshiro Yamada et al.
National Metrology Institute of Japan (NMIJ, AIST), Japan

    IN SITU SILICON WAFER SURFACE TEMPERATURE MEASUREMENTS UTILIZING POLARIZED LIGHT  (abstract)
 

THE USE OF DIFFERENT FURNACES TO STUDY REPEATABILITY AND REPRODUCIBILITY OF THREE PD-C CELLS   (abstract)

   M. Battuello, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   M. Florio, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   F. Girard, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

NEW METHOD OF FILLING OF HIGH TEMPERATURE FIXED POINT CELLS BASED ON METAL-CARBON EUTECTICS/PERITECTICS  (abstract)

   B. Khlevnoy, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   I. Grigoryeva, VNIIOFI, Russian Federation
   N. Ibragimov, VNIIOFI, Russian Federation
   

DEVELOPMENT AND INVESTIGATION OF WC-C PERITECTIC HIGH TEMPERATURE FIXED POINT CELLS  (abstract)

   B. Khlevnoy, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   I. Grigoryeva, VNIIOFI, Russian Federation
   

ON THE IMPURITY PARAMETERS ASSOCIATED WITH IMPURITIES DETECTED IN THE EUTECTICS CO-C, PT-C AND RE-C.  (abstract)

   P. Bloembergen, National Institute of Metrology (NIM), China
   W. Dong, National Institute of Metrology (NIM), China
   T. Wang, National Institute of Metrology (NIM), China
   

IMPROVED PROTOCOL FOR THE REALISATION OF THE TRIPLE POINTS OF CRYOGENIC GASES AS TEMPERATURE FIXED POINTS  (abstract)

   L. Wolber, Physikalisch - Technische Bundesanstalt (PTB), Germany
   B. Fellmuth, Physikalisch - Technische Bundesanstalt (PTB), Germany
   

RECENT PROGRESS TOWARD THE DETERMINATION OF TTP-X(22NE) FOR NEON ISOTOPES  (abstract)

   F. Pavese, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   P. Steur, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   S. Valkiers, Institute for Reference Materials and Measurements (IRMM), Belgium
   T. Nakano, National Metrology Institute of Japan (NMIJ, AIST), Japan
   H. Sakurai, National Metrology Institute of Japan (NMIJ, AIST), Japan
   Osamu Tamura, National Metrology Institute of Japan, Japan, Andrea Peruzzi, VSL Dutch Metrology Institute (VSL), The Netherlands, J van Geel VSL Dutch Metrology Institute (VSL), The Netherlands, Leszek Lipinski Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland, Anna Szmyrka-Grzebyk, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland, Wes Tew National Institute of Standards and Technology (NIST), USA, Ken Hill National Research Council of Canada (NRC), Canada, Alan Steele National Research Council of Canada, Canada, Yves Hermier, Institut National de Métrologie (LNE-INM), France, Fernando Sparasci, Institut National de Métrologie, France

THE TRIPLE POINT TEMPERATURES OF 20NE AND 22NE  (abstract)

   K. Hill, National Research Council (NRC), Canada
   M. Fahr, National Research Council (NRC), Canada
   

DEVELOPMENT OF NEW GALLIUM CELLS AT THE SMU IN THE FRAME OF THE PROJECT EURAMET 732  (abstract)

   J. Ranostaj, Slovak Institute of Metrology (SMU), Slovakia
   S. Ďuriš, Slovak Institute of Metrology (SMU), Slovakia
   M. Kaskötö, Slovak Institute of Metrology (SMU), Slovakia
   R. Knorová, Slovak Institute of Metrology (SMU), Slovakia
   I. Vyskočilova, Slovak Institute of Metrology (SMU), Slovakia
   Rudolf Palenčár, Slovak University of Technology (STU), Slovakia

VALIDATION OF ICE VAPOR PRESSURE-TEMPERATURE CORRELATIONS USING SPECTROSCOPIC MEASUREMENTS OF WATER VAPOR CONCENTRATION  (abstract)

   G. Scace, National Institute of Standards and Technology (NIST), United States
   K. Bielska, University of Nicolas Copernicus, Poland
   D. Havey, National Institute of Standards and Technology (NIST), United States
   J. Hodges, National Institute of Standards and Technology (NIST), United States
   

ON THE WAY TO THE DETERMINATION OF THE VAPOUR PRESSURE CURVE OF PURE WATER  (abstract)

   S. Mokdad, LNE-CETIAT, France
   E. Georgin , LNE-CETIAT, France
   I. Mokbel , LSA UMR 5180 équipe THERMALI, France
   J. Jose, LSA UMR 5180 équipe THERMALI, France
   Y. Hermier , LNE-INM/CNAM, France
   Marc Himbert, Laboratoire commun de métrologie LNE-CNAM, France

INVESTIGATION OF THE SATURATED WATER VAPOR PARTIAL PRESSURE IN PRESENCE OF OTHER GASES  (abstract)

   K. Flakiewicz, Central Office of Measures (GUM), Poland
   R. Jarosz, Central Office of Measures (GUM), Poland
   

INVESTIGATION OF THE SATURATED WATER VAPOR PARTIAL PRESSURE IN PURE PHASE  (abstract)

   K. Flakiewicz, Central Office of Measures (GUM), Poland
   

AN INVESTIGATION OF THE ICE-WATER VAPOUR EQUILIBRIUM ALONG THE SUBLIMATION LINE  (abstract)

   V. Fernicola, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   L. Rosso, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   L. Iacomini, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   M. Giovannini, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

STUDY ON ICE CRYSTAL FORMATION IN A FROST POINT GENERATOR  (abstract)  (poster loaction)

   H. Kajastie, Centre for Metrology and Accreditation (MIKES), Finland
   M. Heinonen, Centre for Metrology and Accreditation (MIKES), Finland
   

THE RUSSIAN NATIONAL STANDARD OF GASES HUMIDITY AND TRACEABILITY SYSTEM OF HUMIDITY MEASUREMENTS  (abstract)  (poster loaction)

   A. Vinge, VNIIFTRI East-Siberian Branch, Russian Federation
   N. Dubovikov, VNIIFTRI East-Siberian Branch, Russian Federation
   O. Podmurnaya, VNIIFTRI East-Siberian Branch, Russian Federation
   I. Sokov, VNIIFTRI East-Siberian Branch, Russian Federation
   N. Skryabikov, VNIIFTRI East-Siberian Branch, Russian Federation
   

HUMID AIR GENERATOR IN LOW-RANGE: QUALIFICATION  (abstract)  (poster loaction)

   E. Georgin, LNE-CETIAT, France
   B. Blanquart, Blanquart, France
   

IMPROVEMENT OF THE NMISA TWO-PRESSURE HUMIDITY GENERATOR  (abstract)  (poster loaction)

   R. MNGUNI, NATIONAL METROLOGY INSTITUTE OF SOUTH AFRICA (NMISA), South Africa
   D. JONKER, NATIONAL METROLOGY INSTITUTE OF SOUTH AFRICA (NMISA), South Africa
   H. LIEDBERG, NATIONAL METROLOGY INSTITUTE OF SOUTH AFRICA (NMISA), South Africa
   

HUMID AIR GENERATOR AT LNE-CETIAT: MODELLING ACTIVITY  (abstract)  (poster loaction)

   E. Georgin, LNE-CETIAT, France
   J. Ouazzani, ARCOFLUID, France
   

HOW CONTINUOUS-WAVE CAVITY RING-DOWN SPECTROSCOPY AND DERIVATIVE METHODS ARE TRANSFORMING METROLOGY LABORATORY PRACTICE  (abstract)  (poster loaction)

   L. Bergson, Tiger Optics, United States
   

LOW COST DEW-POINT TEMPERATURE STANDARD FOR THE FIXED POINT 0 °C  (abstract)  (poster loaction)

   R. Jarosz, Central Office of Measures (GUM), Poland
   K. Flakiewicz, Central Office of Measures (GUM), Poland
   

NEW SATURATOR FOR LOW RANGE DEW/FROST-POINT GENERATOR DPG-1 – PRIMARY HUMIDITY STANDARD IN GUM.  (abstract)  (poster loaction)

   K. Flakiewicz, Central Office of Measures (GUM), Poland
   

CONSITENCY OF THE NATIONAL REALIZATION OF DEWPOINT TEMPERATURE USING STANDARD HUMIDITY GENERATORS  (abstract)  (poster loaction)

   R. Benyon, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   T. Vicente, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   

REVISION OF THE HIGH TEMPERATURE DEWPOINT GENERATOR  (abstract)  (poster loaction)

   R. Bosma, VSL, Netherlands
   A. Peruzzi, VSL, Netherlands
   

TOWARDS A STANDARD FOR MULTI-GAS AND MULTI-PRESSURE HUMIDITY CALIBRATIONS  (abstract)  (poster loaction)

   M. Stevens, National Physical Laboratory (NPL), United Kingdom
   S. Bell, National Physical Laboratory (NPL), United Kingdom
   P. Carroll, National Physical Laboratory (NPL), United Kingdom
   S. Mortimer, National Physical Laboratory (NPL), United Kingdom
   

THERMO-MECHANICAL ANALYSIS OF RUBBER COMPOUNDS FILLED BY CARBON NANOTUBES  (abstract)  (poster loaction)

   P. Koštial, VŠB-Technical university of Ostrava,, Czech Republic
   I. Ružiak, VŠB-Technical university of Ostrava, Czech Republic
   Z. Jančíková, VŠB-Technical university of Ostrava, Czech Republic
   R. Hrehuš, Alexander Dubček University of Trenčín, Slovakia
   J. Kršková, Alexander Dubček University of Trenčín, Slovakia
   Richard Puchký, VŠB-Technical university of Ostrava, Czech Republic

THERMOPHYSICAL PROPERTIES OF URANIUM BASED NIOBIUM AND ZIRCONIUM FROM 23 ºC TO 200 ºC   (abstract)  (poster loaction)

   D. Camarano, National Commission of Nuclear Energy/Nuclear Technnology Developement Center, Brazil
   F. Migliorini, National Commission of Nuclear Energy/Nuclear Technnology Developement Center, Brazil
   E. Silva, National Commission of Nuclear Energy/Nuclear Technnology Developement Center, Brazil
   P. Grossi, National Commission of Nuclear Energy/Nuclear Technnology Developement Center, Brazil
   W. Ferraz, National Commission of Nuclear Energy/Nuclear Technnology Developement Center, Brazil
   João Bosco de Paula, National Commission of Nuclear Energy/Nuclear Technnology Developement Center

DESIGN OF THE SYSTEM FOR MEASUREMENT THERMAL CONDUCTIVITY OF SOLID CONDUCTIVE MATERIALS  (abstract)  (poster loaction)

   L. Lira-Cortes, Centro Nacional de Metrologia (CENAM), Mexico
   G. O.J., Centro Nacional de Metrologia (CENAM), Mexico
   G. Saul, CENAM, Mexico
   M. Edgar, Centro Nacional de Metrologia (CENAM), Mexico
   

DEVELOPMENT OF A PRIMARY MEASUREMENT SYSTEM FOR MEASURING THERMAL CONDUCTIVITY OF FLUIDS  (abstract)  (poster loaction)

   L. Lira-Cortes, Centro Nacional de Metrologia (CENAM), Mexico
   G. Saul, CENAM, Mexico
   M. Edgar, Centro Nacional de Metrologia (CENAM), Mexico
   

DYNAMIC MEASUREMENTS OF THE THERMAL CONDUCTIVITY OF INSULATORS  (abstract)  (poster loaction)

   M. Bezjak, Institute IGH d.d., Croatia
   D. Zvizdić, Faculty of mechanical engineering and naval architecture in Zagreb, Croatia
   

NEW MODELS FOR THE PULSE TRANSIENT TECHNIQUE  (abstract)  (poster loaction)

   V. Bohač, Institute of Physics SAS, Slovakia
   P. Dieška, Department of Physics, Faculty of Electroengineering and Informatics, STU, Slovakia
   Ľ. Kubičár, Institute of Physics SAS, Slovakia
   

THE MOISTURE MONITORING AS A NEGATIVE FACTOR OF DETERIORATION OF MASSIVE ROCKS  (abstract)  (poster loaction)

   V. Boháč, Institute of Physics SAS, Slovakia
   Ľ. Kubičár, Institute of Physics SAS, Slovakia
   M. Brček, Department of Engineering Geology, Comenius University in Bratislava, Faculty of Natural Sciences, Slovakia
   J. Vlčko, Department of Engineering Geology, Comenius University in Bratislava, Faculty of Natural Sciences, Slovakia
   R. Adamcová, Department of Engineering Geology, Comenius University in Bratislava, Faculty of Natural Sciences, Slovakia
   

NEW EQUATION FOR CALCULATION OF WET-BULB TEMPERATURE, INSTRUMENTAL IMPLEMENTATION.  (abstract)  (poster loaction)

   Y. Barbar, «TKA SCIENTIFIC INSTRUMENTS» LTD, Russian Federation
   M. Golikov, «TKA SCIENTIFIC INSTRUMENTS» LTD, Russian Federation
   S. Solovyov, «TKA SCIENTIFIC INSTRUMENTS» LTD, Russian Federation
   

COMPARISON MEASUREMENTS OF INFRARED EAR THERMOMETERS AGAINST THREE TYPES OF BLACKBODIES  (abstract)  (poster loaction)

   S. Tsai, Center For measurement Standards / Industrial Technology Research Institute (ITRI), Taiwan, Province Of China
   H. Lee, Center for Measurement Standards/ITRI, Taiwan, Province Of China
   C. Liu , Center for Measurement Standards/ITRI, Taiwan, Province Of China
   

DEVELOP AN IMAGE PROCESSING AIDED AUTOMATIC APPARATUS FOR IMPROVING THE TEMPERATURE MEASUREMENTS  (abstract)  (poster loaction)

   S. Tsai, Center For measurement Standards / Industrial Technology Research Institute (ITRI), Taiwan, Province Of China
   W. Chang, Center for Measurement Standards/ITRI, Taiwan, Province Of China
   Z. Chung , Center for Measurement Standards/ITRI, Taiwan, Province Of China
   

EVALUATION ON RAIN-DEFENCE PERFORMANCE OF TEMPERATURE SENSORS  (abstract)  (poster loaction)

   J. Zhao, Beijing Changcheng Institute of Metrology and Measurement, China
   Y. Wang, Beijing Changcheng Institute of Metrology and Measurement, China
   P. Wang, Beijing Changcheng Institute of Metrology and Measurement, China
   J. Wu, Beijing Changcheng Institute of Metrology and Measurement, China
   

STUDY OF TFTC DYNAMIC CHARACTER CALIBRATION TECHNIQUE  (abstract)  (poster loaction)

   j. cai, Beijing Changcheng Institute of Metrology and Measurement, China
   x. zhang, Beijing University of Aeronautics and Astronautics, China
   y. yang, Beijing Changcheng Institute of Metrology and Measurement, Beijing University of Aeronautics and Astronautics, China
   j. zhao, Beijing Changcheng Institute of Metrology and Measurement, China
   

AUTOMATION OF A NVLAP ACCREDITED PRT CALIBRATION PROCESS  (abstract)  (poster loaction)

   M. Coleman, Fluke - Hart Scientific, United States
   T. Wiandt, Fluke - Hart Scientific, United States
   

MEASUREMENT UNCERTAINTIES INFLUENCE ON THE THERMAL ENVIRONMENT ASSESSMENT  (abstract)  (poster loaction)

   M. Dell'Isola, University of Cassino , Italy
   A. Frattolillo, University of Cassino, Italy
   B. Palella, University of Napoli Federico II, Italy
   G. Riccio, University of Napoli Federico II, Italy
   

INTEGRAL QA SYSTEM OF ENIRONMENTAL MONITORING AT EARS  (abstract)  (poster loaction)

   D. Groselj, Environmental Agency of the Republic of Slovenia (EARS), Slovenia
   J. Knez, Environmental Agency of the Republic of Slovenia (EARS), Slovenia
   

INVESTIGATION OF 50 Ω RHODIUM–IRON SENSORS WITH CERAMIC SHELL  (abstract)  (poster loaction)

   Y. Lihong, The Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry ,CAS, China
   Q. Yao, Shanghai Institute of Process Automation Instrumentation, China
   Q. Zhang, The Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry ,CAS, China
   Z. Huang, The Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry ,CAS, China
   

DEVELOPMENT OF PRECISION RH-0.5%ATFE THERMOMETERS OF CHINESE PRODUCTION: FINAL TESTS  (abstract)  (poster loaction)

   L. Lipinski, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   A. Szmyrka-Grzebyk, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   P. Lin, National Institute of Metrology (NIM), China
   X. Li, Kunming Dafang Science & Technology Ltd, China
   F. Pavese, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   D. Jancewicz Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS) A. Grykalowska Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS) Henryk Manuszkiewicz Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS) Peter P.M. Steur Istituto Nazionale di Ricerca Metrologica (INRIM)

AUTOMATIC LINEARITY CALIBRATION IN A RESISTANCE THERMOMETRY BRIDGE  (abstract)  (poster loaction)

   R. Walker, Fluke - Hart Scientific, United States
   

THERMAL HYSTERESIS IN THIN-FILM TYPE PLATINUM RESISTANCE THERMOMETERS  (abstract)  (poster loaction)

   K. Gam, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   I. Yang, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   Y. Kim, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   

CALIBRATION OF CAPSULE-TYPE SPRTS AT THE TRIPLE POINT OF WATER FOR THE BOLTZMANN CONSTANT DETERMINATION  (abstract)  (poster loaction)

   F. Sparasci, LNE-INM/CNAM, France
   L. Pitre, LNE-INM/CNAM, France
   D. Truong, LNE-INM/CNAM, France
   

THE HYSTERESIS CHARACTERISTICS OF SOME INDUSTRIAL PRTS  (abstract)  (poster loaction)

   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   C. Jongenelen, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   P. Saunders, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

DRIFT STUDY OF THERMISTORS USED BETWEEN 90 °C AND 150 °C  (abstract)  (poster loaction)

   G. Strouse, National Institute of Standards and Technology (NIST), United States
   W. Miller, National Institute of Standards and Technology (NIST), United States
   C. Meyer, National Institute of Standards and Technology (NIST), United States
   

INFLUENCE OF PRT THERMOPHYSICAL PROPERTIES ON THE MEASUREMENT RESULT OF AL FREEZING POINT TEMPERATURE  (abstract)  (poster loaction)

   A. Ivanova, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   A. Pokhodun, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   O. Shulgat, D.I. Mendeleev Institute for Metrology (VNIIM), Russian Federation
   

EVALUATION OF SMALL SIZED PLATINUM RESISTANCE THERMOMETERS WITH ITS-90 CHARACTERISTICS  (abstract)  (poster loaction)

   K. Yamazawa, National Metrology Institute of Japan (NMIJ, AIST), Japan
   K. Anso, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Widiatmo, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Tamba, National Metrology Institute of Japan (NMIJ, AIST), Japan
   M. Arai, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

SELF-HEATING ANOMALIES IN STANDARD CAPSULE RESISTANCE THERMOMETERS DUE TO AIR CONTAMINATION  (abstract)  (poster loaction)

   W. Tew, National Institute of Standards and Technology (NIST), United States
   C. Meyer, National Institute of Standards and Technology (NIST), United States
   M. Huber, National Institute of Standards and Technology (NIST), United States
   E. Lemmon, National Institute of Standards and Technology (NIST), United States
   

CALIBRATION OF THERMOCOUPLES AND BROAD BAND RADIATION THERMOMETERS BY COMPARISON TO RADIATION THERMOMETRY  (abstract)  (poster loaction)

   M. Maria Jose, Centro Español de Metrologia, Spain
   Z. Manuel, Centro Español de Metrologia, Spain
   D. Del Campo, Centro Español de Metrologia, Spain
   

MEASURING SYSTEMS FOR THERMOMETERS CALIBRATION IN LOW TEMPERATURE RANGE  (abstract)  (poster loaction)

   A. Szmyrka-Grzebyk, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   L. Lipinski, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   H. Manuszkiewicz, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   A. Kowal, Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS), Poland
   A. Grykałowska, Institute of Low Temperature and Structure Research, Poland
   Dominik Jancewicz, Institute of Low Temperature and Structure Research Pl Poland

A CHANGEABLE APERTURE BLACKBODY FOR LOW TEMPERATURE REFERENCE SOURCE TO 245 K  (abstract)  (poster loaction)

   H. Ko, Center For measurement Standards / Industrial Technology Research Institute (ITRI), Taiwan, Province Of China
   

CALIBRATION OF RADIATION THERMOMETRY FIXED POINTS USING AU/PT THERMOCOUPLES  (abstract)  (poster loaction)

   F. Jahan, National Measurement Institute, Australia
   M. Ballico, National Measurement Institute, Australia
   

A CRYOSTAT FOR AUTOMATED MILLI-KELVIN LEVEL CALIBRATIONS OF IPRTS FROM -202 TO 250C  (abstract)  (poster loaction)

   M. Ballico, National Measurement Institute, Australia
   

USE OF GRAPHITE ELEMENTS IN PYROGRAPHITE HEATER OF BB3200/BB3500 TYPE FURNACES FOR HTFP APPLICATIONS  (abstract)  (poster loaction)

   B. Khlevnoy, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   I. Grigoryeva, VNIIOFI, Russian Federation
   N. Ibragimov, VNIIOFI, Russian Federation
   

DEVELOPMENT OF ONBOARD GALLIUM FIXED-POINT BLACKBODY FOR PROSPECTIVE IN-FLIGHT CALIBRATIONS  (abstract)  (poster loaction)

   A. Puzanov, ALL-Russian Research Institute for Optical and Physical Measurement (VNIIOFI), Russian Federation
   M. Samoylov, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   A. Burdakin, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   B. Khlevnoy, All-Russian Research Institute for Opto-Physical Measurements (VNIIOFI), Russian Federation
   

METHOD FOR EFFECTIVE CALIBRATION OF TEMPERATURE LOGGERS WITH AUTOMATED DATA SAMPLING AND EVALUATION  (abstract)  (poster loaction)

   S. Ljungblad, SP Technical Research Institute of Sweden, Sweden
   L. Josefson, SP Technical Research Institute of Sweden, Sweden
   M. Holmsten, SP Technical Research Institute of Sweden, Sweden
   

ESTABLISHMENT OF NIMT ZINC FIXED POINT CELL  (abstract)  (poster loaction)

   C. Yaokulbodee, National Institute of Metrology (NIMT), Thailand
   U. Norranim, National Institute of Metrology (NIMT), Thailand
   J. Widiatmo, National Metrology Institute of Japan (NMIJ, AIST), Japan
   K. Yamazawa, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Tamba, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

TRACEABILITY AND QUALITY CONTROL IN A REFERENCE RADIOMETRIC CALIBRATION PROGRAM  (abstract)  (poster loaction)

   F. Liebmann, Fluke - Hart Scientific, United States
   M. Coleman, Fluke - Hart Scientific, United States
   T. Wiandt, Fluke - Hart Scientific, United States
   

CAN SALT BATHS BE USED IN TEMPERATURE RANGES BETWEEN 180°C TO 550°C WITH UNCERTAINTIES OF LESS THAN 30 M°C  (abstract)  (poster loaction)

   M. Patan Alper, Yeditepe University , Turkey
   A. İnce, Yeditepe University , Turkey
   M. Aiordachioaiei, Yeditepe University , Turkey
   

TEMPERATURE PROFILE CHARACTERIZATION OF BATHS IN THREE DIMENSIONS  (abstract)  (poster loaction)

   M. Torun, Yeditepe University , Turkey
   A. İnce, Yeditepe University, Turkey
   

A NEW BASIC METHOD TO CALIBRATE IR THERMOMETER CALIBRATORS  (abstract)  (poster loaction)

   D. Cardenas-Garcia, Centro Nacional de Metrologia (CENAM), Mexico
   S. Luyo-Alvarado, Centro Nacional de Metrologia (CENAM), Mexico
   H. Rodriguez-Arteaga, Centro Nacional de Metrologia (CENAM), Mexico
   E. Mendez-Lango, Centro Nacional de Metrologia (CENAM), Mexico
   

PRACTICAL HIGH-TEMPERATURE FURNACE FOR THE APPLICATION IN THERMOMETRY AND RADIOMETRY  (abstract)  (poster loaction)

   K. Anhalt, Physikalisch - Technische Bundesanstalt (PTB), Germany
   L. Buenger, Physikalisch - Technische Bundesanstalt (PTB), Germany
   E. Schreiber, KE Technologie GmbH, Germany
   J. Hartmann, Physikalisch - Technische Bundesanstalt (PTB), Germany
   

CALIBRATION BY COMPARISON OF PLATINUM RESISTANCE THERMOMETERS USING SLOW RESISTANCE BRIDGES  (abstract)

   V. Batagelj, MIRS/UL-FE/LMK, Slovenia
   J. Bojkovski, MIRS/UL-FE/LMK, Slovenia
   

THE DEVELOPMENT OF A DEVICE FOR ON-SITE CALIBRATION OF THERMOMETERS  (abstract)  (poster loaction)

   M. de Groot, MartinDeGroot Consultancy, Netherlands
   

THE LATEST DEVELOPPEMENT AT THE-CALIBRATION OF PLATINUM RESISTANCE THERMOMETERS (PRTS)  (abstract)  (poster loaction)

   D. Nyamba, Inspection de la Qualité et de la Métrologie (IQM), Burkina Faso
   

EUTECTIC GA-IN AS CALIBRATION REFERENCES FOR CALIBRATION LABORATORY AMBIENT THERMOMETERS  (abstract)  (poster loaction)

   E. Mendez-Lango, Centro Nacional de Metrologia (CENAM), Mexico
   

FREEZING POINT TEMPERATURE OF H2O-NACL SOLUTIONS FOR CALIBRATION OF CRYOSCOPES   (abstract)  (poster loaction)

   E. Mendez-Lango, Centro Nacional de Metrologia (CENAM), Mexico
   L. Lira-Cortes, Centro Nacional de Metrologia (CENAM), Mexico
   R. Quiñones-Ibarra, Universidad de la Sierra, Mexico
   

PRACTICAL CALIBRATION OF PLATINUM RESISTANCE THERMOMETERS IN THE RANGE -190 °C TO 0 °C  (abstract)  (poster loaction)

   J. De Lucas, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   R. Benyon, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   

THE CALIBRATION OF DATALOGGERS FOR THE CHARACTERIZATION OF STERILIZATION AUTOCLAVES  (abstract)  (poster loaction)

   R. Benyon, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   J. De Lucas, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   H. Fuentes, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
   

A LOW TEMPERATURE COMPARATOR FOR CALIBRATION OF INDUSTRIAL THERMOMETERS IN THE RANGE -215 °C TO -60 °C  (abstract)  (poster loaction)

   C. de Bruin-Barendregt, VSL, Netherlands
   R. Bosma, VSL, Netherlands
   R. Van Breugel, VSL, Netherlands
   A. Peruzzi, VSL, Netherlands
   

REALISATION OF THE INTERNATIONAL TEMPERATURE SCALE AT ČMI  (abstract)  (poster loaction)

   R. Strnad, Czech Metrology Institute, Czech Republic
   M. Šindelář, Czech Metrology Institute, Czech Republic
   

THE LABORATORY SETUP FOR CALIBRATING OF THE SURFACE TEMPERATURE SENSORS  (abstract)  (poster loaction)

   R. Strnad, Czech Metrology Institute, Czech Republic
   M. Šindelář, Czech Metrology Institute, Czech Republic
   

UNCERTAINTY BUDGET FOR THE NIST HYBRID HUMIDITY GENERATOR  (abstract)  (poster loaction)

   C. Meyer, National Institute of Standards and Technology (NIST), United States
   W. Miller, National Institute of Standards and Technology (NIST), United States
   D. Ripple, National Institute of Standards and Technology (NIST), United States
   G. Scace, National Institute of Standards and Technology (NIST), United States
   

DEW/FROST-POINT UNCERTAINTY ANALYSIS OF THE SWSY-S HUMIDITY GENERATOR  (abstract)  (poster loaction)

   J. Gong, Changcheng Institute of Metrology & Measurement, AVIC, China
   Y. Zhang, Changcheng Institute of Metrology & Measurement, AVIC, China
   Y. Han, Changcheng Institute of Metrology & Measurement, AVIC, China
   

UNCERTAINTY PROPAGATION FOR PLATINUM RESISTANCE THERMOMETERS CALIBRATED ACCORDING TO ITS-90  (abstract)  (poster loaction)

   P. Rosenkranz, BEV, Austria
   

UNCERTAINTY OF THE KRISS LOW FROST POINT HUMIDITY GENERATOR   (abstract)  (poster loaction)

   B. CHOI, Korea Research Institute of Standards and Science (KRISS), Korea, Republic Of
   J. Kim, Korea Research Institute of Standards and Science, Korea, Republic Of
   S. Woo, Korea Research Institute of Standards and Science, Korea, Republic Of
   

ALGEBRAIC APPROACHE FOR CALCULATING OF TOTAL UNCERTAINTIES IN SPRT MEASUREMENT  (abstract)  (poster loaction)

   R. Palenčár, Slovak University of Technology (STU), Slovakia
   S. Ďuriš, Slovak Institute of Metrology (SMU), Slovakia
   J. Ranostaj, Slovak Institute of Metrology (SMU), Slovakia
   

UNCERTAINTY EVALUATION OF THE NEW SET-UP FOR MEASUREMENT OF WATER VAPOUR PERMEATION RATE BY A DEW-POINT SENSOR  (abstract)  (poster loaction)

   D. Hudoklin, MIRS/UL-FE/LMK, Slovenia
   J. Šetina, Institute of metals and technology, Slovenia
   J. Drnovšek, MIRS/UL-FE/LMK, Slovenia
   

SPRT CALIBRATION INTERVAL DETERMINATION USING THE CALIBRATION HISTORY AND THE R(0.01 °C) VALUE  (abstract)

   G. Strouse, National Institute of Standards and Technology (NIST), United States
   

COMPARISON MEASUREMENT FOR THE DEVELOPMENT OF HIGH TEMPERATURE PLATINUM RESISTANCE SCALE  (abstract)

   K. Yamazawa, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Widiatmo, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Tamba, National Metrology Institute of Japan (NMIJ, AIST), Japan
   M. Arai, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

EVALUATION OF MODIFIED ADC BASED THERMOMETRY BRIDGE  (abstract)

   T. Podgornik, MIRS/UL-FE/LMK, Slovenia
   V. Batagelj, MIRS/UL-FE/LMK , Ljubljana, Slovenia
   G. Winkler, TU Graz, Graz, Austria
   H. Hartl, Space Research Institute (IWF), Austrian Academy of Sciences, Graz, Austria
   J. Drnovšek, MIRS/UL-FE/LMK , Ljubljana, Slovenia
   

DETERMINATION OF HYSTERESIS IN CALIBRATION OF PRTS  (abstract)

   V. Žužek, MIRS/UL-FE/LMK, Slovenia
   V. Batagelj, MIRS/UL-FE/LMK, Slovenia
   J. Bojkovski, MIRS/UL-FE/LMK, Slovenia
   

HUMIDITY CONTROL IN A CALIBRATION SYSTEM FOR PTU DEVICES  (abstract)

   S. Saxholm, Centre for Metrology and Accreditation (MIKES), Finland
   M. Heinonen, Centre for Metrology and Accreditation (MIKES), Finland
   

A RELIABLE RELATIVE HUMIDITY CALIBRATION IN ORDINARY CLIMATIC CHAMBER  (abstract)

   N. Stepanić, Institute of Nuclear Sciences VINČA, Serbia
   N. Milošević, Institute of Nuclear Sciences VINČA, Serbia
   

REPRODUCIBILITY IN CALIBRATIONS OF THE THERMOHYGROMETERS – HYSTERESIS IN THE RH INDICATIONS  (abstract)

   R. Jarosz, Central Office of Measures (GUM), Poland
   

COMPARISON OF BLACKBODIES FOR CALIBRATION OF INFRARED EAR THERMOMETERS  (abstract)

   I. Pušnik, MIRS/UL-FE/LMK, Slovenia
   S. Clausen, RISØ National laboratory, Denmark
   J. Favreau , Laboratoire National de Métrologie et d'Essais (LNE), France
   B. Gutschwager , Physikalisch-Technische Bundesanstalt (PTB), Germany
   A. Kartal Dogan, TUBITAK Ulusal Metroloji Enstitusu (UME), Turkey
   Ahmet Diril, Ozlem Pehlivan Guven (TUBITAK UME); McEvoy Helen, NPL, UK; Samset Hoem Stian, Justervesenet, Norway; Steiner Anton, METAS, Swiss; van der Ham Eric, NMI VSL, The Netherlands

A COMPARISON OF THE ITS90 BETWEEN, NPL, NIM AND CEM ABOVE THE SILVER POINT USING HIGH TEMPERATURE FIXED POINTS  (abstract)

   G. Machin, National Physical Laboratory (NPL), United Kingdom
   D. Wei, National Institute of Metrology (NIM), China
   M. Martin, CEM, Spain
   D. Lowe, National Physical Laboratory (NPL), United Kingdom
   T. Wang, National Institute of Metrology (NIM), China
   

DISSEMINATING THE ITS-90 TRACEABILITY IN INDUSTRY – AN INTERCOMPARISON OF TEMPERATURE BLOCK CALIBRATORS  (abstract)

   J. Nielsen, Danish Technological Institute, Denmark
   M. Nielsen, Danish Technological Institute, Denmark
   

EVALUATION OF CALIBRATION LABORATORIES PERFORMANCE   (abstract)

   E. FILIPE, INSTITUTO PORTUGUÊS DA QUALIDADE, Portugal
   

UNCERTAINTIES IN THE SPRT SUB-RANGES OF ITS-90: TOPICS FOR FURTHER RESEARCH   (abstract)

   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   M. Ballico2, D del Campo3, S. Duris4, E. Filipe5, A. Ivanova6, A. Kartal Dogan7, E. Mendez-Lango8, C. Meyer9, F. Pavese10, A. Peruzzi11, E. Renaot12, S. Rudtsch13, T. Wang 14, K. Yamazawa 15. 2National Measurement Institute of Australia (NMIA), Sydney, Australia, 3Centro Español de Metrologia (CEM), Madrid, Spain 4Slovak Institute of Metrology (SMU), Bratislava, Slovakia 5Instituto Português da Qualidad (IPQ), Monte de Caparica, Portugal 6D.I. Mendeleyev Scientific and Research Institute for Metrology (VNIIM), St Petersburg, Russia 7TUBITAK Ulusal Metroloji Enstitusu (UME), Gebze-Kocaeli, Turkey 8Centro Nacional de Metrologia (CENAM), Queretaro, Mexico 9National Institute of Standards and Technology(NIST), Gaithersburg, USA 10National Institute of Metrological Research (INRIM), Torino, Italy 11VSL Dutch Metrology Institute (VSL), Delft, The Netherlands 12Bureau National de Métrologie (LNE-INM), Paris, France 13Physikalisch-Technische Bundesanstalt (PTB), Berlin, Germany 14 National Insitute of Metrology(NIM), Beijing, China 15 National Metrologyt Institute of Japan(NMIJ), AIST, Tsukuba, Japan

THE USE OF REFERENCE FUNCTIONS IN HUMIDITY CALCULATIONS  (abstract)

   J. Lovell-Smith, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   

MEASUREMENT UNCERTAINTY OF THE DEW POINT TEMPERATURE USING AN ITERATIVE MATHEMATICAL MODEL  (abstract)

   L. Martins, Laboratório Nacional de Engenharia Civil, Portugal
   A. Silva Ribeiro, Laboratório Nacional de Engenharia Civil, Portugal
   J. Alves e Sousa, Laboratório Regional de Engenharia Civil, Portugal
   A. Forbes, National Physical Laboratory (NPL), United Kingdom
   

UNCERTAINTY EVALUATION OF RADIATION THERMOMETER CALIBRATION USING BAYES’ THEOREM AND MONTE CARLO  (abstract)

   P. WANG, Center For measurement Standards / Industrial Technology Research Institute (ITRI), Taiwan, Province Of China
   C. HUNG, Center For measurement Standards / Industrial Technology Research Institute (ITRI), Taiwan, Province Of China
   H. KO, Center Measurement Standard/Industrial Technology Research Insitute, Taiwan, Province Of China
   

DOPING EXPERIMENTS IN TRIPLE POINT OF MERCURY CELLS  (abstract)

   C. Tabacaru, Centro Español de Metrología, Spain
   E. Gómez, Centro Español de Metrología, Spain
   D. del Campo, Centro Español de Metrología, Spain
   

REPEATABILITY & REPRODUCIBILITY EVALUATION IN FIXED POINT CELLS COMPARISONS  (abstract)

   M. Dobre, SMD, Belgium
   E. Filipe, IPQ, Portugal
   I. Lobo, IPQ, Portugal
   

IMPROVED ESTIMATES OF THE ISOTOPIC CORRECTION CONSTANTS FOR THE TRIPLE POINT OF WATER  (abstract)

   R. White, Measurement Standards Laboratory of New Zealand (MSL), New Zealand
   W. Tew, National Institute of Standards and Technology (NIST), United States
   

DISTANCE EFFECT AND SIZE-OF-SOURCE EFFECT OF RADIATION THERMOMETERS  (abstract)

   X. Hao, National Institute of Metrology (NIM), China
   Z. Yuan, National Institute of Metrology (NIM), China
   X. Lu, National Institute of Metrology (NIM), China
   W. Zhao, National Institute of Metrology (NIM), China
   

CALIBRATION OF THE SPECTRAL RESPONSIVITY OF FILTER RADIOMETER FOR T MEASUREMENT AT NIM  (abstract)

   X. Lu, National Institute of Metrology (NIM), China
   Z. Yuan, National Institute of Metrology (NIM), China
   

A DYNAMIC METHOD TO MEASURE EMISSIVITY AT HIGH TEMPERATURES  (abstract)

   S. Krenek, Physikalisch - Technische Bundesanstalt (PTB), Germany
   K. Anhalt, Physikalisch- Technische Bundesanstalt (PTB), Germany
   A. Lindemann, Netzsch Gerätebau GmbH, Germany
   J. Hollandt, Physikalisch- Technische Bundesanstalt (PTB), Germany
   J. Hartmann, Physikalisch- Technische Bundesanstalt (PTB), Germany
   

CALIBRATION OF RADIATION THERMOMETERS AND FIXED POINTS IN THE MIDDLE-TEMPERATURE RANGE FROM 160 °C TO 420 °C  (abstract)

   Y. Shimizu, National Metrology Institute of Japan (NMIJ, AIST), Japan
   J. Ishii, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

PRESENT ESTIMATES OF THE DIFFERENCES BETWEEN THERMODYNAMIC TEMPERATURES AND THE ITS-90  (abstract)

   J. Fischer, Physikalisch - Technische Bundesanstalt (PTB), Germany
   M. DePodesta, NPL, United Kingdom
   K. Hill, National Research Council (NRC), Canada
   M. Moldover, NIST, United States
   L. Pitre, LNE-INM/CNAM, France
   Richard Rusby, NPL, UK Peter Steur, INRIM, IT Osamu Tamura, NMIJ AIST, JP Rod White, MSL, NZ Lutz Wolber, PTB, DE

DIELECTRIC-CONSTANT GAS THERMOMETRY WITH NEON AND HELIUM FROM 25 K TO 36 K  (abstract)

   C. Gaiser, Physikalisch - Technische Bundesanstalt (PTB), Germany
   B. Fellmuth, Physikalisch - Technische Bundesanstalt (PTB), Germany
   N. Haft, Physikalisch - Technische Bundesanstalt (PTB), Germany
   

COMPARISON OF A DETECTOR-BASED NIR RADIANCE-SCALE TO AN ITS-90 CALIBRATED RADIATION THERMOMETER  (abstract)

   G. Eppeldauer, National Institute of Standards and Technology (NIST), United States
   H. Yoon, National Institute of Standards and Technology (NIST), United States
   V. Khromchenko, National Institute of Standards and Technology (NIST), United States
   A. Smith, National Institute of Standards and Technology (NIST), United States
   S. Brown, National Institute of Standards and Technology (NIST), United States
   National Institute of Standards and Technology, United States

MONOCHROMATOR BASED ABSOLUTE CALIBRATION OF RADIATION THERMOMETERS  (abstract)

   T. Keawprasert, Physikalisch - Technische Bundesanstalt (PTB), Thailand
   K. Anhalt, Physikalisch - Technische Bundesanstalt (PTB), Germany
   d. Taubert, Physikalisch - Technische Bundesanstalt (PTB), Germany
   A. Abd ElMageed, Physikalisch- Technische Bundesanstalt, Germany
   A. Sperling, Physikalisch - Technische Bundesanstalt (PTB), Germany
   Juergen Hartmann,PTB, Germany

CONSTANT-VOLUME GAS THERMOMETRY WITH DIFFERENT HELIUM GAS DENSITIES AT NMIJ/AIST  (abstract)

   O. Tamura, National Metrology Institute of Japan (NMIJ, AIST), Japan
   S. Takasu, National Metrology Institute of Japan (NMIJ, AIST), Japan
   T. Nakano, National Metrology Institute of Japan (NMIJ, AIST), Japan
   H. Sakurai, National Metrology Institute of Japan (NMIJ, AIST), Japan
   

ACOUSTIC THERMOMETRY: NEW RESULTS FROM 7 K TO 273 K AT LNE-INM/CNAM  (abstract)

   L. Pitre, LNE-INM/CNAM, France
   F. Sparasci, LNE-INM/CNAM, France
   D. Truong, LNE-INM/CNAM, France
   

DESIGN AND CAPABILITIES OF A CUSTOM-MADE THERMOSTAT   (abstract)

   A. Merlone, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   F. moro, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   S. Lago, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   P. Giuliano Albo, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

NORMAL SPECTRAL EMISSIVITY OF THE INDUSTRIALLY USED ALLOY HS2-9-1-8 AT 684.5 NM  (abstract)

   H. Reschab, Graz University of Technology, Austria
   C. Cagran, Graz University of Technology, Austria
   M. Hafok, Bohler Edelstahl GmbH & Co KG, Austria
   M. Hausbauer, Bohler Edelstahl GmbH & Co KG, Austria
   R. Tanzer, Bohler Edelstahl GmbH & Co KG, Austria
   Gernot Pottlacher, Graz University of Technology, Austria

VIRTUAL EXPERIMENTS BY PULSE HEATING TECHNIQUES: CYLINDRICAL SPECIMEN MODELS  (abstract)

   G. Bussolino, CNR - Istituto per i Processi Chimico-Fisici, Pisa, Italy
   G. Annino, CNR - Istituto per i Processi Chimico-Fisici, Pisa, Italy
   C. Ferrari, CNR - Istituto per i Processi Chimico-Fisici, Pisa, Italy
   F. Righini, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
   

MEASUREMENT OF THERMAL CONDUCTIVITY OF MATERIALS USED IN BUILDINGS  (abstract)

   L. Lira-Cortes, Centro Nacional de Metrologia (CENAM), Mexico
   G. Saul, CENAM, Mexico
   M. Edgar, Centro Nacional de Metrologia (CENAM), Mexico
   

THERMOPHYSICAL PROPERTIES OF MATERIALS: NEW CHALLENGES FOR REDUCING THE UNCERTAINTIES  (abstract)

   J. Filtz, LNE, France
   B. Hay, LNE, France
   J. Hameury, LNE, France
   F. Haloua, LNE, France
   

THE THERMAL CONDUCTIVITY OF HUMID AIR  (abstract)

   S. Beirão, Centro de Ciências Moleculares e Materiais and Departamento de Química e Bioquímica Faculdade de Ciências da Universidade de Lisboa, Portugal
   A. Ribeiro, Centro de Ciências Moleculares e Materiais and Departamento de Química e Bioquímica Faculdade de Ciências da Universidade de Lisboa, Portugal
   M. Lourenço, Centro de Ciências Moleculares e Materiais and Departamento de Química e Bioquímica Faculdade de Ciências da Universidade de Lisboa, Portugal
   F. Santos, Centro de Ciências Moleculares e Materiais and Departamento de Química e Bioquímica Faculdade de Ciências da Universidade de Lisboa, Portugal
   C. Nieto de Castro, Centro de Ciências Moleculares e Materiais and Departamento de Química e Bioquímica Faculdade de Ciências da Universidade de Lisboa, Portugal
   

DETERMINATION OF MOISTURE DIFFUSIVITY AS A FUNCTION OF BOTH MOISTURE AND TEMPERATURE  (abstract)

   Z. Pavlik, Czech Technical University in Prague, Czech Republic
   R. Cerny, Czech Technical University in Prague, Czech Republic
   

APPLICATION OF TIME-DOMAIN REFLECTOMETRY FOR MEASUREMENT OF MOISTURE PROFILES IN A DRYING EXPERIMENT  (abstract)

   Z. Pavlík, Czech Technical University in Prague, Czech Republic
   J. Mihulka, Czech Technical University in Prague, Czech Republic
   R. Černý, Czech Technical University in Prague, Czech Republic
   

RAPID MOISTURE MEASUREMENT WITH MICROWAVE RESONANCE TECHNOLOGY IN INFANT FORMULAS  (abstract)

   G. Merkh, University of Hohenheim, Germany
   M. Dambacher, University of Hohenheim, Germany
   H. Isengard, University of Hohenheim, Germany
   

CAPABILITIES OF AUTOMATED KARL-FISCHER-TITRATION OF SELECTED DAIRY PRODUCTS  (abstract)

   R. Pfaff, University of Hohenheim, Germany
   G. Merkh, University of Hohenheim, Germany
   H. Isengard, University of Hohenheim, Germany
   

EXPERIMENTAL INVESTIGATION OF THERMAL PROPERTIES OF INSULATING MATERIALS AS THE MOISTURE CONTENT VARIES   (abstract)

   D. Francesca Romana, Dipartimento di Ingegneria Meccanica (DIMEC) - Università di Salerno, Italy
   M. Dell'Isola, Dipartimento di Meccanica, Strutture, Ambiente e Territorio (DiMSAT) - Università degli Studi di Cassino, Italy
   G. Gaspare, Dipartimento di Meccanica, Strutture, Ambiente e Territorio (DiMSAT) - Università degli Studi di Cassino, Italy
   J. Elvira, Dipartimento di Ingegneria Meccanica (DIMEC) - Università di Salerno, Italy
   

NON-DESTRUCTIVE MOISTURE MEASUREMENT OF BIODEGRADABLE POLYMERS FOR MEDICAL IMPLANTS  (abstract)

   P. Carroll, National Physical Laboratory (NPL), United Kingdom
   S. Bell, National Physical Laboratory (NPL), United Kingdom
   T. Maxwell, National Physical Laboratory (NPL), United Kingdom
   P. Tomlins, National Physical Laboratory (NPL), United Kingdom
   

THERMAL ASSESSMENT AND REALIZATION OF THE INDIUM MELTING POINT BY USING AN ADIABATIC CALORIMETRY TECHNIQUE  (abstract)

   G. Failleau, LNE-INM/CNAM, France
   R. Morice, LNE-INM/CNAM, France
   N. Fleurence, LNE-INM/CNAM, France
   E. Rénaot, LNE-INM/CNAM, France
   E. Gaviot, Laboratoire d'Acoustique de l'Université du Maine UMR CNRS 6613, France
   

PROCEDURE FOR THE IMPURITY-RELATED CORRECTION AT THE INDIUM FIXED POINT   (abstract)

   S. Rudtsch, Physikalisch - Technische Bundesanstalt (PTB), Germany
   T. Gusarova, BAM Federal Institute for Materials Research and Testing, Germany
   A. Aulich, Physikalisch - Technische Bundesanstalt (PTB), Germany
   M. Fahr, National Research Council (NRC), Canada
   J. Fischer, Physikalisch-Technische Bundesanstalt (PTB), Germany
   Heinrich Kipphardt, Ralf Matschat, Ulrich Panne, BAM Federal Institute for Materials Research and Testing

INVESTIGATION OF NEWLY DEVELOPED ITS-90 SILVER AND COPPER POINT BLACKBODIES  (abstract)

   F. Bourson, LNE-INM/CNAM, France
   M. Sadli, LNE-INM/CNAM, France
   B. Rougié, LNE-INM/CNAM, France
   S. Briaudeau, LNE-INM/CNAM, France
   

MODELLING OF TRANSIENT HEAT TRANSFER IN ZINC FIXED POINT CELL  (abstract)

   S. Krizmanic, Faculty of Mechanical Engineering and Naval Architecture, Croatia
   D. Zvizdic, HMI/FSB-LPM, Croatia
   T. Veliki, HMI/FSB-LPM, Croatia